Chemguard 6% Afff Military Specification Foam 5 Gallon Pail

CHEMGUARD 6% AFFF MILITARY SPECIFICATION FOAM (5 GALLON PAIL)

Aqueous Film Forming Foam (AFFF) 

Chemguard 3% and 6% Standard Grade AFFF are synthetic aqueous film forming foam concentrates consisting of fluorocarbon surfactants, solvents and foam stabilizers. It is manufactured under strict quality control standards to ensure a reliable and dependable product. When mixed with water in the correct proportion, the mixture makes very fluid foam, which will flow rapidly over the fuel's surface. As the expanded foam mass begins draining, an aqueous film is formed that helps prevent the further release of any fuel vapors. The 3% SG AFFF or 6% SG-AFFF is recommended for use where fast knockdown, especially of a spill fire, is the primary requirement.

Chemguard 3% SG-AFFF is intended for use at a proportioning rate of 3% (3 parts SG-AFFF to 97 parts water) on Class B hydrocarbon based flammable or combustible liquids such as gasoline, diesel, kerosene, jet fuel, etc. Chemguard 3% SG-AFFF is NOT intended for use on any fuels, which are polar solvent/water miscible such as alcohols, ketones, esters, etc.

Chemguard 6% SG-AFFF is intended for use at a proportioning rate of 6% (6 parts SG-AFFF to 94 parts water) on Class B hydrocarbon based flammable or combustible liquids such as, gasoline, diesel, kerosene, jet fuel, etc. Chemguard 6% SG AFFF is NOT intended for use on any fuels, which are polar solvent/water miscible such as alcohols, ketones, esters, etc.

FEATURES

• Suitable for use with either fresh or salt water
• Excellent wetting characteristics when used in combating Class “A” fuel fires
• If inadvertently frozen, thawing will render product completely serviceable again
• Suitable for use with carbon steel, fiberglass, polyethylene or stainless steel. Chemguard 3% SG-AFFF and 6% SG-AFFF concentrates are not compatible with galvanized pipe or fittings in an undiluted form.
• Suitable for use with siliconized dry chemical extinguishing agents
• Recommended application rate on hydrocarbon fuel spills is .10 gpm. /sq. ft.
• Compatible with other 3% AFFF or 6% AFFF concentrates of equal quality

PROPORTIONING

• Fixed or portable in-line eductors
• In-line balanced pressure and pump pressure proportioning systems
• Bladder tank balanced pressure proportioning systems
• Around the pump proportioners
• Handline, air-aspirating nozzles with fixed eductor pickup tube

DISCHARGE DEVICES

• Foam Chambers
• Air-aspirating and non air-aspirating sprinkler heads or spray nozzles
• Standard water fog nozzles for handlines and monitors
• Air-aspirating foam nozzles
• Foam makers for use with either Floating Roof storage tanks or Dike/Bund protection systems
• High back pressure foam makers for sub-surface base injection system (hydrocarbon type fuels only)

APPLICATIONS

• Crash Fire Rescue
• Storage Tanks(non-polar solvent fuels only)
• Truck/Rail Loading or Unloading Facilities
• Processing/Storage Facilities
• Docks/Marine Tankers 
• Flammable Liquid Containment Areas
• Mobile Equipment

PERFORMANCE
To ensure the fire fighting performance required in today's market, Chemguard tests the 3% SG-AFFF and 6% SG-AFFF concentrates on a modified 50 square foot heptane fire at an application rate of 0.08 gpm/square foot.

FOAMING PROPERTIES
When 3% SG-AFFF or 6% SG-AFFF is mixed with water at the correct ratio, air-aspirating type discharge devices typically generate expansion ratios between 5-10 to 1. Non air-aspirating type devices will typically generate expansion ratios of between 2-4 to 1. Expansion ratios are dictated by the type of discharge device, flow rate and discharge pressure.

Technical Specifications

Quantity discounts available - over 180 gallons

NOTE: Due to the shipping weight of this item, additional shipping charges will apply. For a shipping quote prior to purchasing, Call (888) 681-1009. Otherwise, you will be contacted after your order has been processed online.