Chemguard NFF 3x3 UL201 3%x3% Non-Fluorinated Foam Concentrate

Chemguard NFF 3x3 UL201 3%x3% Non-Fluorinated Foam Concentrate

Features

• Designed in accordance with NFPA Standard 11 for Low-,Medium-, and High-Expansion Foam
• UL162 listed as a synthetic alcohol resistant foam concentrate for use on hydrocarbon and polar solvent fuel fires
• Passes UL162 type III test protocol on hydrocarbons at the same design application rate (0.10 gpm/ft2 (4.1 Lpm/m2)) as traditional AR-AFFF products with similar control times
• Recommended for use at 0.10 gpm/ft2 (4.1 Lpm/m2) for spill fire applications
• Effective control and suppression on hydrocarbon fuels
• Superior drain times to high-quality AR-AFFFs, delivering a longer lasting foam blanket for better burnback resistance and vapor suppression post-extinguishment

Description
CHEMGUARD® NFF 3x3 UL201 is a 3%x3% Alcohol Resistant Non-Fluorinated Foam Concentrate that provides excellent fire and vapor suppression for Class B, polar solvent and hydrocarbon fuel fires. This synthetic foam concentrate is intended for forceful or gentle firefighting applications at 3% solution on hydrocarbon fuels and gentle firefighting applications at 3% solution on polar solvent fuels. CHEMGUARD® NFF 3x3 UL201 foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance:

• The foam blanket blocks oxygen supply to the fuel and suppress fuel vapor with extended drain times for better vapor suppression after extinguishment.
• On polar solvent fires, liquid drains from the foam blanket and forms a polymeric membrane which protects the foam from destruction by the polar fuel, suppresses vapors, and seals the fuel surface.
• The water content of the foam solution produces a cooling effect for additional fire suppression.

CHEMGUARD® NFF 3x3 UL201 is defined as a non-fluorinated firefighting foam concentrate, produced in equipment free from the use of PFAS chemistry. Since this product is free from any intentionally added PFAS chemistry, and precautions have been used to avoid PFAS contamination, it inherently complies with Directives (EU) 2017/1000 on PFOA and 2019/1021 (EU POPs directive) as a non-fluorinated product.

The two most important items to consider with Non Fluorinated Foam (Environmentally Friendly)

• Our product does not require the use of air aspirating discharge devices to over expand the foam solution. Our competitors’ products require this. The Ansul and Chemguard products are very effective at expansion ratios as low as 3:1 which can be achieved using a standard hand line nozzle or monitor nozzle. No need to purchase special equipment to apply the foam solution.
• In addition our application rates are much lower than our competitors’ products. Example - Our application rate on alcohol is .17 GPM per square foot where our competitors is .28 GPM per square foot – Meaning less flow rate is required to achieve the same results. That is a 64 percent difference.

*Sale not permitted in: NY, CT, NH, CA

Please review and follow the tank, eductor, and pump manufacturer recommendations for maintaining your system, particularly when changing concentrated foam or additive products. Use the system and the product in compliance with the manufacturer directions.