Draeger Pac 5500 Single Gas Detector

(0) No Reviews yet
SKU: DS-4543960


Please select options before adding to cart


Draeger Pac 5500 Single Gas Detector

Dräger Pac 5500 is the innovative single gas instrument for personal gas detection in work places. The instrument will be used for the reliable monitoring of ambient air and gives a fast warning of harmful concentrations of carbon monoxide, hydrogen sulphide, or oxygen. With a concentration display, event logger and without replacing the sensor, the Dräger Pac 5500 can be used maintenance-free for over two years.

The instrument was designed for long operation time without replacing the sensor. Using a PC with installed software, the IR interface enables the user to perform easy configuration, calibration, and downloading of the event logger.

Small and Robust
Size and weight of Dräger Pac 5500 are perfect for personal monitoring. The housing of the small and ergonomic instrument is covered with rubber. The instrument meets the requirements of IP 65. An alligator clip provides secure attachment of the unit to the wearer.

Easy to operate
Once activated, the instrument can be used for over 2 years maintenance-free. With only two buttons the operation is intuitive. To avoid misuse button function can be blocked. An easy to change lithium battery powers the instrument.

Concentration Display
The large and language-independent display continuously shows the concentration with large digits. In case of an alarm or on a button press, the backlight provides a clear readout.

New Sensor Technology
The new Dräger XXS sensors react rapidly due to very fast electro-chemical reaction times and a very short diffusion path.

Bump Test Mode
Dräger Pac 5500 is equipped with a bump test mode. If it is necessary to check the calibration by performing a bump test a notice icon will light in the display. The bump test period can be adjusted by the user. The bump test can be performed manually or automatically. A Bump Test Station is available. The bump test adjustments can be activated using the PC software Pac Vision or CC Vision. The result of the bump test (passed or failed) will be stored in the event logger.

Alarm / Warning Functions
Never worry about noticing alarms under noise or lighting conditions again! A vibrating alarm, an acoustic alarm and an optical alarm all react when the gas concentration exceeds the set alarm thresholds. For optimal alarm awareness, a two-tone-alarm is used. Before the end of the instrument’s useable life and before the end of the battery capacity a warning will also occur.

Adjustable Operating Timer
With this function, a specific operation period in days can be set, e. g. to adjust a “calibration due date”, an “inspection due date”, or a special “out of order date”. The adjustment can be done by PC with installed software Pac Vision or CC Vision

Event Logger
Dräger Pac 5500 is equipped with an event logger. The event logger stores 60 events. If event no. 61 occurs, the logger overwrites the oldest stored event. For download of the stored data with date and time, a PC and the installed software Pac Vision, CC Vision or Gas Vision is used. Depending on the selected configuration the pre- or main-alarm can be acknowledged.

Calibration and Configuration
For calibration or individual configuration Dräger Pac 5500 will be connected to a PC using the connecting cradle or the ECal System. This combination and the installed software Pac Vision or CC-Vision enable the calibration and configuration of all instrument functions and the download of stored data.

Please note that the full line of Draeger products and accessories is available. Please call us at 732-502-8060 or email us at sales@allhandsfire.com

Ratings & Reviews

No reviews available

Be the first to Write a Review