Lightweight and compact, ECONOFLO™ has
standard brass GHT fittings and is factory proof pressure test rated at
300 PSIG (2100 kPa). A 100% filament polyester, elastomer lined,
single-jacket flat-woven hose; available in 3/4" and 5/8" (19 mm and 16
mm) sizes with yellow ENCAP™ .
Designed for wildland
applications, ECONOFLO™ can also be used for Hazardous Material
operations and personnel decontamination. When used on or around asphalt
or pavement, care must be taken to minimize damage by abrasion or
pin-holing may occur. ECONOFLO™ options include a Pouch for belt wear
and a compact Brass Nozzle. Its variety of exceptional features makes
ECONOFLO™ a very popular hose.
ECONOFLO™
specifications
The hose shall be a single jacket construction with 100% spun
polyester yarn.
There shall be a minimum of 21.0 filler yarns per inch in the
jacket.
The thickness of the lining shall be 0.012" (305 µm) minimum
and it shall be constructed of extruded T.P.U. elastomer.
If required (optional), the outside jacket shall be treated
with yellow ENCAP elastomer, which shall completely encapsulate the
jacket fibers and not merely surface coat the jacket.
The hose service temperature range shall be -60°F to 140°F
(-51°C to 60°C).
At 300 PSIG (2100 kPa), its elongation shall not exceed 2% of
the initial hose length, it shall not warp more than 10 inches (25 cm)
and should not rise from the test table.
The hose shall not twist more than 5 turns per 50 ft (15,2 m)
while at 300 PSIG (2100 kPa).
Minimum service test pressure of 150 PSIG (1050 kPa).
Minimum proof test pressure of 300 PSIG (2100 kPa).
Minimum straight burst test pressure of 600 PSIG (4200 kPa).
The hose while curved to a radius of 27" (69 cm) shall not
burst at less than 600 PSIG (4200 kPa).
I just wanted to let All Hands Fire know how impressed I am with both your customer service.”
