Welcome to All Hands Fire Equipment. These pages were created as a response from our customers requesting that all products within a category be included in one page for easy printing. The pages display our categories and products in a list form. You can now select a category and print out the products for reference at a later time.
|
USED 100' X 2.5" GREEN ULTRA FORCE 2000 | Home | Hose Specials | Buy This Product Online |
USED 100' x 2.5" GREEN ULTRA FORCE 2000 Product Code: SPEC-UF2000
Price: Check LatestUSED 100' x 2.5" GREEN ULTRA FORCE 2000
THIS HOSE WAS USED AS A DEMO FOR ONE FIRE DEPARTMENT AND IS NOW AVAILABLE TO YOU AT THIS BLOWOUT PRICE!!!
THERE ARE 3 LENGTHS AVAILABLE AT THIS PRICE. PLEASE CHOOSE IN THE DROP-DOWN LIST IF YOU WOULD LIKE ONE LENGTH OR ALL THREE
NIEDNER ULTRA FORCE 2000 MUNICIPAL HOSE - Designed for busy fire departments for its dependibility, maneuverability and maximum water flow - Fire Attack and Pre-Connect applications
ULTRA FORCE 2000™: Similar to ULTRA 2000™ this durable fire hose with a service test pressure rating of 400 psig (2800 kPa) is a 100% polyester double jacket fire hose, but has an EPDM rubber liner for enhanced durability and kink resistance. ULTRA FORCE 2000™ is the choice of the busiest fire departments for dependability, maneuverability and maximum water flow, while remaining lighter and more compact than competitive products. The tight weave of the outer jacket resists snags, cuts, punctures, and abrasion. The ENCAP™ treatment improves durability, reduces water absorption up to 40%, enhances chemical resistance, and adds color options.
• Construction: Circular woven, double jacket 100% virgin spun polyester.
• Tube: Lightweight extruded E.P.D.M. rubber - Ozone and age resistant.
• Length: 50' to 100' (15,2 to 30,5 m).
• Jacket Treatment: ENCAP® encapsulation. Provides water repellency, abrasion, oil and chemical resistance.
• Option: Colors available: clear (white), green, red, orange, blue, tan and yellow.
ULTRA 2000TM Specifications
- The hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets.
- There shall be a minimum of 10.0 filler yarns per inch in both the inner and outer jackets.
- Outside jacket to be constructed with a minimum of 120% warp yarn coverage.
- The thickness of the lining shall be 0.022" (55.9 µm) minimum and it shall be constructed of lightweight extruded E.P.D.M. rubber.
- The outside jacket shall be treated with ENCAP® elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
- The hose service temperature range shall be -40°F to 175°F (-40°C to 79°C).
- FM abrasion test of 30,000 cycles minimum and Taber abrasion test of 12,000 cycles minimum.
- At 800 PSIG (5600 kPa), its elongation shall not exceed 10% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
- The hose shall not twist more than 2 1/2 turns per 50 ft (15,2 m) while at 800 PSIG (5600 kPa).
- Minimum service test pressure of 400 PSIG (2800 kPa).
- Minimum proof test pressure of 800 PSIG (5600 kPa).
- Minimum straight burst test pressure of 1400 PSIG (9800 kPa).
- The hose while curved to a radius of 27" (69 cm) shall not burst at less than 1300 PSIG (9000 kPa).
- Meets or exceeds NFPA 1961 specification.
Available sizes: 1 1/2", 1 3/4", 2", & 2 1/2"
Here is how the Niedner Fire Attack hoses rate:
* GOOD: XL800 / RXL800
* BETTER: ULTRA 2000 / ULTRA FORCE 2000
* BEST: POWERLINEVariation in length of hose or coupling other then NST is available, contact us at (732) 502-8060
All Hands™ Fire Equipment • PO Box 1245 • Wall, NJ • 07719 Phone: (732) 502-8060 • Fax: (732) 502-8064 | |