Lifeliners Fire Hood 3-Layer PBIP84 Composite 35Tpp Composite

Lifeliners Fire Hood 3-Layer PBIP84 Composite 35Tpp Composite

This is a 15 oz triple layer 20/80 PBI/Lenzing FR (two outer layers) and 40/55/5 P84/Lenzing FR/Kevlar (inner layer) hood with notched shoulder cut out for superior fit.

Fabric:

• Head Outer Layer: 20/80 PBI/LenzingFR - 6.5 oz sq yd
• Head Middle Layer: 20/80 PBI/LenzingFR - 6.5 oz sq yd
• Head Inner Layer 40/55/5 P84/Lenzing Fr/Kevlar - 8.4 oz sq yd
• Bib Both Layers: 40/55/5 P84/Lenzing Fr/Kevlar - 8.4 oz sq yd

Construction:

• All Layers 1x1 Rib Knit
• Stretch: 65%

Color:

• Head Outer Layer: Tan
• Head Middle Layer: Tan
• Head Inner Layer Yellow
• Bib Both Layers: Yellow

Head Design:

• Style: Separate head with sewn on back and front bib. The back of the head ends at the nape of the upper neck. The back bib is sewn at this point.
• Layers: Three
• Measurements: See Spec

Bib Design:

• Style: A two piece double layer yoke style bib is sewn to the head and forms a neck seam. The front and back bib are joined at the shoulder to form a notched shoulder seam on either side of the head.
• Layers: Two
• Measurements: See Spec

Face Opening:

• Face Opening Sewn with ½ inch elastic
• Relaxed Measurement: 5 to 5.5 inches
• Fully Stretched Measurement: Exceeds 15 inches

Construction:

• Head Seams: All head and bib seams sewn with flat lock stitch.
• Face Opening: Elastic sewn to edge with three thread overlock stitch; turned under and sewn with a two needle cover stitch.
• Binding: One and a half inch binding sewn to hem through folder with a three thread cover stitch to create a ½ inch finished bound hem.
• Thread: 100% Nomex

Labels:

• FR label
• All four label edges sewn to the hood

Certification:

• Classified by Underwriters Laboratories to meet NFPA Standard 1971 2018 edition.