Niedner Red Draftex Forestry Hose

(0) No Reviews yet
$94.99 to $133.99
$94.99 to $133.99



Please select options before adding to cart


Niedner Red Draftex Forestry Hose

An extremely lightweight suction hose, the DRAFTEX® Red single jacket construction uses 100% spun polyester combined with a helical interior reinforcement. It is lined with TPU elastomer and encapsulated with red DRAFTKOTE to enhance durability. With a service test pressure rating of 300 PSIG (2100 kPa) DRAFTEX®  is designed for Forest Service use with portable pumps as well as other pump applications. Patent No. 2168497.


  • The hose shall be a single jacket construction of 100% virgin spun polyester, DRAFKOTE™ treated,combined with a special helical interior reinforcement.
  • There shall be a minimum of 14.0 filler yarns per inch in the jacket.
  • The thickness of the lining shall be 0.030" (762 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
  • The outside jacket shall be treated with DRAFTKOTE™ elastomer which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
  • The hose service temperature range shall be -60°F to 140°F (51°C to 60°C).
  • FM abrasion test of 3,000 cycles minimum.
  • At 600 PSIG (4200 kPa), its elongation shall not exceed 6% of the initial hose length, it shall not warp more than 10 inches (25 cm) and should not rise from the test table.
  • The hose shall not twist more than 10 turns per 100 ft (30,5 m) while at 450 PSIG (3150 kPa).
  • Minimum service test pressure of 300 PSIG (2100 kPa).
  • Minimum proof test pressure of 600 PSIG (4200 kPa).
  • Minimum straight burst test pressure of 900 PSIG (6300 kPa).
  • The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa).
  • Minimum vacuum test pressure of 25 inches of mercury (84,7 kPa).

*Hose Couplings are Aluminium NPSH, for other options please contact us.

Ratings & Reviews

No reviews available

Be the first to Write a Review