Niedner Spec 187 Single Jacket Forestry Hose - White

Niedner Spec 187 Single Jacket Forestry Hose - White

An extremely lightweight all synthetic forestry layflat hose, SPEC 187™ meets or exceeds USDA FSS 5100-187 Type 1. This most widely used forestry hose is made of 100% filament polyester and is lined with TPU elastomer. SPEC 187™ is rated for 300 PSIG (2100 kPa) service test pressure. Being very lightweight and compact allows more of this hose to be packed and carried than other forestry hose products.

1 1/2" (38 mm) size meets or exceeds USDA FSS 5100-187 Type I and ULC S-518.1-95

SPEC 187™ specifications

• The hose shall be a single jacket construction with 100% virgin filament polyester.
• There shall also be a minimum of 14.5 polyester filler yarns per inch in the jacket.
• The thickness of the lining shall be 0.015" (381 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
• The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
• FM abrasion test of 1,000 cycles minimum.
• At 600 PSIG (4200 kPa), its elongation shall not exceed 6% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
• The hose shall not twist more than 10 turns per 100 ft (30,5 m) while at 600 PSIG (4200 kPa).
• Minimum service test pressure of 300PSIG (2100kPa).
• Minimum proof test pressure of 600PSIG (4200kPa).
• Minimum straight burst test pressure of 900 PSIG (6300 kPa).
• The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa).
• Meets or exceeds USDA 5100-187 and UL-19 specifications.