Rescue Pump Jet Gearcase Rotor House Assembly - Complete - For 40 HP & 50 HP
Details
Rescue Pump Jet Gearcase Rotor House Assembly - Complete - For 40 HP & 50 HP
The Rescue pump jet is designed for use with 40HP and 50HP Tohatsu motors.
Rotor Housing
The Rotor Housing reduces entry of lines and debris which wind up around a propeller. The entrance design prevents this from happening. The design also allows for the service of the drive train as it would be with a standard propeller. Typically, objects larger than a golf ball cannot enter the pump jet.
Rotor
The Rotor is designed to move water through the pump. Most debris can be flushed out of the pump jet by cycling the motor into forward and reverse. The rotor has a standard rubber hub installed for shock reduction. Removal and replacement of the rubber hub is similar to a standard propeller.
The Rescue pump jet is designed for use with 40HP and 50HP Tohatsu motors.
Rotor Housing
The Rotor Housing reduces entry of lines and debris which wind up around a propeller. The entrance design prevents this from happening. The design also allows for the service of the drive train as it would be with a standard propeller. Typically, objects larger than a golf ball cannot enter the pump jet.
Rotor
The Rotor is designed to move water through the pump. Most debris can be flushed out of the pump jet by cycling the motor into forward and reverse. The rotor has a standard rubber hub installed for shock reduction. Removal and replacement of the rubber hub is similar to a standard propeller.
Specifications
Design and Orientation- By orienting the pump jet "looking forward" 100% of the outboard's horsepower is utilized. Slight or no loss of boat speed.
- The rotating action of the rotor on the water entering the pump jet contains and focuses the water jet out of the nozzle exit. The result is improved thrust.
- Rotor is encased in a housing that reduces the likelihood of personal contact or injury
- Rotor housing is smaller than a standard propeller diameter
- Unique, efficient, and techno-advanced design based on decades of R & D
Reliability & Service
- Built on a production gear case with Forward / Neutral / Reverse
- Requires no additional servicing or special tools. Propeller is removed. Pump jet is installed
- Equal fuel consumption at equal RPM's as compared to a propeller - through system matching of exhaust back-pressures
- Solid aluminum casings for rugged dependability and repairability
- Adds less than 10 pounds to overall weight of outboard
- Manufacturer's warranty includes: Manufacturer's defect, Accidental damage, Pump jet tune up
Performance & Applications
- Delivers superior performance in both steering and handling
- Preferred choice of Fire / Rescue Departments for swift water rescue operations
- Used by U.S. Department of Defense where underwater obstacles are a concern, and to prolong the useful life of outboards
- Beneficial around divers, swimmers & wildlife
- Overall design restricts debris from entering the pump jet and winding around the output shaft (weeds, fishing line, nets, etc)
Ratings & Reviews
No reviews available
Be the first to Write a Review