SMC NFPA 4 Bar U-Rack

(0) No Reviews yet
$165.00
SKU: SMC-NFPA14400
$165.00

Details

SMC NFPA 4 Bar U-Rack

If you want to start a heated debate among Rappel Rack aficionados just ask the group what style is best, J-Racks or U-Racks? Both share benefits such as providing the largest range of friction control with a variety of ropes, being great as either a lowering device or on rappel, not twisting ropes and so on. The benefit that people most often attribute to the U-Rack over the J-Rack is greater strength. This is a fallacy, despite being the common understanding, as the system fails when the rope brakes rather than the device breaking. As a result, both types of racks achieve similar ratings.

U-Racks are used in the opposite orientation as J-Racks in that the rack is clipped to the harness or anchor at the bend area of the frame with the “legs” always pointing away from the user. The U-Rack does not facilitate friction variation by dropping or adding bars as the J-Rack does and the U-Rack should never be used with less than 4 bars. The benefit of the SMC designed 4 bar U-Rack is having the two opposed tied-off bars. This provides the opportunity for quicker tie-off methods (user can braid the rope between the 2 pins much like a boat cleat is used) and the user can have more “fine tuned” friction possibilities on a shorter and lighter system. The 6 Bar version utilizes a single Tie-Off Bar and 5 Brake Bars.
  • SMC U-Rack assemblies are the only such U-Racks which are UL Certified to the current NFPA standards.
  • U-Rack may be used as either a rappel or lowering device.
  • U-Rack provides for even distribution of weight between both sides of the rack.
  • U-Rack does not twist rope, as can occur when using a Figure 8 type descender.
  • U-Rack may be used with single or double ropes of varying diameters.
  • Different length racks provide wide range of friction and control under varying weights and applications.
  • User may adjust friction by simply wrapping rope around the Tie-Off Bar(s).
  • Stainless steel rack material provides greater strength, reliability and long lasting service.
  • Tie-Off Bars are tubular stainless steel for longer life.
  • Brake Bars are available as aluminum or stainless steel and come in a variety of styles and sizes.
  • Racks & bars may be purchased separately so that the user may have a greater range of set-up configurations tailored to meet their individual needs for non-NFPA applications and as replacement parts.

Certified by Underwriter’s Laboratories to meet the NFPA 1983 “G” - General Use & "T" Technical Use.

Specifications:
  • Material: Stainless Steel Frame, Stainless Steel Tie-Off Bars & Brake Bars
  • Dimensions: 9.6" Long
  • Weight: 26.6 oz (754g)
  • NFPA1983 Certified
  • Made In USA

Ratings & Reviews

No reviews available

Be the first to Write a Review