Tempest Single Speed Electric Positive Pressure Blower

SKU TT-EB
(0) No Reviews yet
$2,871.99 to $3,188.99

Details

Tempest Single Speed Electric Positive Pressure Blower 

Tempest offers the most complete line of electric blowers for Positive Pressure Ventilation (PPV) and Negative Pressure Ventilation (NPV). Built on the same platform that made the Tempest direct-drive blowers so successful, the electric blowers are powerful, durable, and versatile. 

Tempest Single-Speed PPV fans feature some of the lightest designs available and are perfect for departments looking to go electric on a limited budget. 

Airflex Composition Impeller: 
Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. 

Welded Steel Roll Cage Frame: 
Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. 

Ergonomic Design: 
The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible. 

Foot Operated Tilt Adjustment: 
No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. 

GFCI Compatible Single Speed Electric: 
The Single Speed’s 1.5 and 1.0 HP motors are extremely simple to operate with only a single switch used to turn the unit ON or OFF. All models are GFCI compatible and will run on any 15 amp circuit without tripping the breaker. Every Single Speed positive pressure ventilation fan provides impressive CFM capable of creating positive pressure ventilation. 

8″ Non-Pneumatic Wheels: 
Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated. 

Turbo 2000 Shroud: 
By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. 

Flip-Up/Fold-Down Handle: 
The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. 

Dual “Winning Step”: 
No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position. 

Safety Grille: 
Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. 

Information/Safety Bar: 
Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use.
 

Specifications

  • Type:  Positive Pressure Ventilation Fan, Cone Air Flow (CAF)
  • Blade:  16", 18", 21", or 24" Diameter Assembly, AirFlex Fiberglass Reinforced Polyamide Blades
  • Frame:  Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish
  • Shroud:  Turbo 2000 Design, Tapered Aluminum w/ Durable Powder-Coat Finish
  • Wheels:  16" Models: 6" Non-Pneumatic w/ Steel Hubs
    18", 21" and 24" Models: 8" Non-Pneumatic w/ Steel Hubs
  • Grille:  Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety
    Meets UL & European CE Safety Standards
  • Drive:  Single Speed Electric
    16″ Models: 1.5 HP TEFC Motor
    18", 21" and 24" Models: 1.0 HP TEFC Motor
    GFCI Compatible: Designed to Run on 15 AMP Circuit – Actual Draw Approx. 14 AMP
    110V / 60Hz Standard (Other Options may be Available)
  • Explosion Proof Motor Option:  Rated for Class I (Groups C & D) and Class II (Groups F & G) Environments
  • Tilt: 14 GA. – 60′ 12 GA. – 95′ 10 GA. – 150′ 8 GA. – 240′ 6 GA. – 380′

 

Ratings & Reviews

No reviews available

Be the first to Write a Review

Videos

Size Chart

Training Materials