Draeger Pac 6500 Disposable Personal Gas Detector

Draeger Pac 6500 Disposable Personal Gas Detector

*Used by the FDNY*

The robust Draeger PAC 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely.

Quick sensor response times and a replaceable battery also ensure safety. Powerful sensors with a very low t-90 response time ensure quick reactions. The  PAC 6500 is versatile thanks to its wide measurement range. For example, the CO sensor measures concentrations from 1 to 1,999 ppm, and the H2S sensor from .4 to 100 ppm. The meter features a large display that clearly indicates the respective gas concentration. Other important information, such as the battery capacity, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

f the PAC 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LED's on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time, even if they have been acknowledged. The PAC 6500 with oxygen sensor has two additional alarm thresholds in addition to the standard alarm threshold settings. This provides an additional level of safety as a pre-alarm, in addition to the main alarm, can be set for both oxygen enriched and oxygen deficient atmospheres. 

The Draeger PAC 6500 features a data logger and event logger for analyses and reports. The data can be loaded on a PC via and interface and processed further there.

All versions of the PAC 6500 are equipped with extremely durable Draeger Sensors and a powerful battery. The PAC 6500 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, you can quickly and easily replace it yourself, The device is then ready to use again right away.

Function test and calibrations can be carried in the Draeger X-dock calibration system ( see related items). The automatic bump tests in the X-dock are a cost efficient and convenient solution thanks to the short test duration and the extremely low consumption of test gas. The PAC 6500 is simply placed in the bump test station and automatically selects the correct setting. 

* This meter features a 3 year warranty on the sensor. Draeger recommends that you calibrate this device every 6 months, and requires that you calibrate it every 12 months.*