Draeger X-Am 2500 Multi Gas Detector
Details
Draeger X-Am 2500 Multi Gas Detector With Data Logging
The X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S-LC and is the only 1-4 gas monitor you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.
The X-am 2500 has a large, easy to read, liquid-crystal display. All gas readings are shown simultaneously and resize automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in alarm will be highlighted and will alternate with the alarm level indication of A1 or A2.
The innovative, catalytic Ex sensor has a high degree of drift stability with a high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than five years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring, according to IEC/EN 60079-29-1, from methane to nonane.
The X-am 2500 is compatible with Draeger’s X-dock testing and calibration station. X-dock is Draeger’s new solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump tests in 8 to 15 seconds with more than 40 % less gas consumption than competitive instruments. The X-am 2500 is also compatible with the Dräger Bump Test Station with NiMH battery and charger kit.
The X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S-LC and is the only 1-4 gas monitor you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.
The X-am 2500 has a large, easy to read, liquid-crystal display. All gas readings are shown simultaneously and resize automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in alarm will be highlighted and will alternate with the alarm level indication of A1 or A2.
The innovative, catalytic Ex sensor has a high degree of drift stability with a high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than five years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring, according to IEC/EN 60079-29-1, from methane to nonane.
The X-am 2500 is compatible with Draeger’s X-dock testing and calibration station. X-dock is Draeger’s new solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump tests in 8 to 15 seconds with more than 40 % less gas consumption than competitive instruments. The X-am 2500 is also compatible with the Dräger Bump Test Station with NiMH battery and charger kit.
Specifications
- Dimensions: 1.85" x 5.12" x 1.73"
- Weight: 8 - 9 oz
- Ambient Conditions
- Temp: -4 - 122°F
- Pressure: 20.7 to 38.4 inch Hg
- Relative Humidity: 10 to 95% r.h.
- Protection Class: IP67
- Alarms
- Visual: 360°
- Audible: Multi-tone > 90 dB at 30 cm
- Operating Times
- > 12 h with alkaline and NiMH
- > 13 h with NiMH HC, > 250 h w/o Ex sensor with alkaline batteries
- Charging Times: < 4 h
- Data Logger: Retrievable using an infrared interface > 1000 h with 4 gases at a recording interval of 1 value per minute
- Pump Operation: Maximum hose length 45 m; 147 ft.
- Approvals:
- Class I Div. 1 Group A, B, C, D
- A/Ex ia IIC T3/Ga
- A/Ex d ia IIC T4/T3/Gb
- T. Code T4/T3
Ratings & Reviews
No reviews available
Be the first to Write a Review