Firetuff General Use 18" Chain Saw

(0) No Reviews yet


The Fire Tuff - General Use Fire Department Chain Saw

The Fire Tuff's features make it perfect as a "General Use" fire service saw. We have also added a few features to improve this saw's usefulness in the Fire Service...
  • Bar and Chain Included - 18-inch bar with chain to handle many different operations
  • Orange Powerbox carrying case that protects and holds saw and equipment in a secure fit by using the exclusive "Leash System"
  • Reflective saw shoulder carrying sling
  • Wrench holder attached to handle for on the scene adjustments
  • Large D-handle for firefighter glove friendly pull starts
  • Saw scabbard for safety, chain protect on and attachment of our reflective shoulder strap

Manufacturer's Features:
  • More power where you need it. The X-TORQ engine design increases torque over a wider rpm range and results in maximum cutting power.
  • Easy to start. Smart Start decompression valve and a newly designed starter handle effectively reduce the required pulling force and provide a firm, sturdy grip. Fuel pump and combined choke/stop control allow for easier starting and reduces the risk of engine flooding.
  • Air Injection. Centrifugal air cleaning system for longer intervals between filter cleanings, smoother operation and reduced wear.
  • Quick-release air filter.Makes it easy to remove the air filter for cleaning or replacement.
  • LowVib reduces fatigue.The handle is separated from the engine and cutting equipment with steel springs that reduce tiring vibrations. These heavy-duty steel springs are resistant to fuel, temperature variation and UV light.
  • Optimized saw body.Smooth underside, rounded starter cover and well-protected controls make the saw easy to handle, reduce the risk of getting caught in tree branches and make transportation easier.

  • Cylinder displacement: 3.4 cu.inch / 55.5 cm³
  • Power: 3.4 hp / 2.5 kW
  • Idling speed: 2700 rpm
  • Maximum power speed: 9000 rpm
  • Bore: 1.8" / 47 mm
  • Stroke: 1.3" / 32 mm
  • Ignition system: SEM AM50
  • Ignition module air gap: 0.01" / 0.3 mm
  • Spark plug: Champion RCJ 7Y, NGK BPMR7A
  • Electrode gap: 0.02" / 0.5 mm
  • Carburetor, type: Walbro WTA
  • Fuel tank volume: 0.9 US pint / 0.44l
  • Oil tank volume: 0.7 US pint / 0.32l
  • Oil pump capacity: 11.5 m/s
  • Weight excl. cutting equipment: 12.8 lbs / 5.8 kg

Note: The photo above is intended to show both sides of the saw and the saw in the saw box (included). This is not an offer for three saws at the price listed. If you are looking to purchase more than one saw, please indicate the number of saws in the box marked "Quantity". Thank you.

Ratings & Reviews

No reviews available

Be the first to Write a Review