• Home
  • Majestic Fire Apparel Gore Particulate Hood GEN2 Ultra C6

Majestic Fire Apparel Gore Particulate Hood GEN2 Ultra C6

(0) No Reviews yet
SKU: MFA-Gore-Ultra-C6-GEN2


Majestic Fire Apparel Gore Particulate Hood GEN2 Ultra C6

The level of comfort you get from the GORE Particulate Hood GEN2 has been improved for a more natural feel without compromising protection. Its level of breathability helps reduce heat stress, enabling you to wear the hood longer at the fireground.

While exceeding the thermal protection requirements of the NFPA 1971, 2018 Edition, the GORE Particulate Hood GEN2 also exceeds the Standard’s particulate-blocking requirements with a protective barrier that blocks more than 99.99 percent of potentially harmful particulates*. This hood delivers reliable protection throughout the entire hood — even blocking smoke at critical seams more effectively than other particulate hoods currently available. At the same time, its construction is optimized to reduce interference with sounds and signals on the fireground.

This exceptionally reliable GEN2 hood retains its level of more than 99.99 percent particulate-blocking performance* even after laundering. Its unique inspection opening enables you to inspect the entire hood visually, inside and out.

The GEN2 hood has contrasting colors — white (see Nomex Blend) or black on the outside and blue on the inside, helping you to prevent cross-contamination. The GORE Particulate Hood GEN2 combines the expertise of the industry leader in comfort and barrier technology with the skill of one of the most respected hood manufacturers, Majestic Fire Apparel.

Air Permeability is a Two-Way Street
Products with higher air permeability potentially decrease protection against fireground contaminants because they can allow more air and particles to pass through a barrier. Instead, products that combine high breathability and a higher particle-blocking efficiency deliver a better balance of comfort and protection.
With the GEN2 hood, Gore has achieved more than 99.99 percent particulate blocking*, while delivering improved comfort through high moisture vapor breathability

  • Head design: Comfort on the crown of the head replaces traditional center seam
  • Bib (Apron) Design: Longer length, notched shoulder bib design

Layers for Head and Bib
  • 2-ply material (outer to inner)
  • Ultra C6/GORE Particulate Blocking Layer 2.0

  • Head Length: 15"
  • Bib (Apron) Length: 8"
  • OVERALL Length: 23"

Face Opening
  • Circular face opening, seem with 1/2" elastic
  • Elastic is encapsulated in material and cover stitched

Inspection Opening
  • The GORE Particulate Hood Gen2 has an Inspection Opening in the back binding of the hood. The Inspection Opening allows the hood to be turned inside out so the GORE Particulate Blocking Layer 2.0 can be visually inspected for damage.

  • Binding of same fabric material to enhance design with a finished look.

  • Thread: 100% Nomex
  • Comfort insert on the crown of the head replaces traditional center seam
  • Safety lock cover stitch of seams

Universal Sizing
  • NFPA 1971-2018 UL Certified

*Particulates in the 0.1 to 1.0-micron range, per NFPA 1971, 2018 Edition

Ratings & Reviews

No reviews available

Be the first to Write a Review