PGI Cobra Classic 100% Nomex Meta-Aramid Firefighting Hood
Details
PGI Cobra Classic 100% Nomex Meta-Aramid Firefighting Hood
Cobra™ Classic™ hoods provide double layer coverage of neck, upper chest and top of the shoulder blades. The notched side helps bib lie flat for improved interface with bunker coat. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 17" to ensure a snug fit around most SCBA masks. UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting – Current Edition.
Fabric Description:
Nomex® has excellent thermal stability and will not melt or drip. Fabric has outstanding strength, abrasion resistance and chemical resistance.
Features:
- Double layer coverage of neck, upper chest and top of the shoulder blades.
- Length top to bottom, front to back bib approximately 19".
- Shoulders are contoured to reduce bunching at neck and bib.
- Bib length from below face opening is 10½".
- UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting — Current Edition.
Specifications
Test Results
Thermal Protective Performance (TPP)
- As Received: 27.1 minutes
- After 5 Washings: 27.1 minutes
Hood Material Burst Strength: 716 N
Flame Resistance Test
- After Flame (Wales x Courses) As Received: 0.0 sec x 0.0 sec
- After Flame (Wales X Courses) After 5 Washings: 0.0 sec x 0.0 sec
- Char Length (Wales x Courses) As Received: 39 mm x 39 mm
- Char Length (Wales x Courses) As Received: 32 mm x 37 mm
Cleaning Shrinkage Resistance Test
- Hood Measurement After 5 Washings: -1.0% to -0.7%
Heat & Thermal Shrinkage Resistance Test
- Hood Measurement As received: -1.5% to 0.0%
- Hood Measurement After 5 Washings: -0.1% to 1.5%
Limited Oxygen Index (LOI): 31
Seam Breaking Strength Test: 1394 N
Melt or Drip When Exposed to Flame: NONE
Ratings & Reviews
No reviews available
Be the first to Write a Review