PGI Cobra Ultimate PBI/Lenzing FR with Comfort Plus Liner Firefighting Hood
Details
PGI Cobra Ultimate PBI/Lenzing FR with Comfort Plus Liner Firefighting Hood
Cobra™ Ultimate™ hoods are double ply and feature extra-long length that covers head, chest, shoulders and shoulder blades for enhanced protection. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 16" to ensure a snug fit around most SCBA masks. UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting – Current Edition.
The Comfort Plus™ Advantage:
A lightweight, high performance lining made from flame resistant Nomex® and Lenzing FR® fibers that deliver an exceptionally high TPP rating. Softer and more breathable, this liner is designed to keep the wearer cooler, drier and more comfortable.
Fabric Description:
PBI is an extraordinary fiber that doesn’t burn in air. Blended with Lenzing FR®, this fabric is the most comfortable flame resistant hood fabric on the market. Even though fabric is incredibly lightweight, the proprietary Comfort Plus™ Liner offers an exceptionally high TPP rating.
Features:
- Designed for maximum protection.
- Double layer coverage of head, neck, chest and shoulder blades.
- Gusset at side seams add additional coverage at top of shoulders and is patterned to reduce bib from bunching in front and back.
- Bib length from below face opening is 12½".
- Length top to bottom, front to back approximately 21½".
- UL Classified to NFPA 1971 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting — Current Edition.
Specifications
Test Results:
Thermal Protective Performance (TPP)
- As Received: 40.7 minutes
- After 5 Washings: 39.0 minutes
Hood Material Burst Strength
- PBI/Lenzing FR: 408 N
- Comfort Plus: 374 N
Flame Resistance Test
- PBI Lenzing FR After Flame (Wales x Courses) As Received: 0.0 sec x 0.0 sec
- PBI Lenzing FR After Flame (Wales x Courses) After 5 Washings: 0.0 sec x 0.0 sec
- PBI Lenzing FR Char Length (Wales x Courses) As Received: 30 mm x 20 mm
- PBI Lenzing FR Char Length (Wales x Courses) After 5 Washings: 18 mm x 19 mm
- Comfort Plus Char Length (Wales x Courses) As Received: 39 mm x 38 mm
- Comfort Plus Char Length (Wales x Courses) After 5 Washings: 33 mm x 38 mm
Cleaning Shrinkage Resistance Test Hood Measurement After 5 Washings: -0.7% to 0.0%
Heat & Thermal Shrinkage Resistance Test
- Hood Measurement As Received: -1.5% to 0.0%
- Hood Measurement After 5 Washings: 0.0% to 0.4%
Limited Oxygen Index (LOI)
- PBI/Lenzing FR: 33
- Comfort Plus: 29
Seam Breaking Strength Test: 806 N
Melt or Drip When Exposed to Flame: NONE
Arc Thermal Performance (ATPV): 9.4 cal/cm^2
NFPA 70E Hazard Risk Category (HRC): HRC 2
Ratings & Reviews
No reviews available
Be the first to Write a Review