Fire Axe Inc JP Special Polished Steel Pick Head

(0) No Reviews yet


Please select options before adding to cart


JP Special Polished Steel Pick Head

Redesigned to cut faster, penetrate more deeply, and come back for more.
In reducing the head length to 10 1/4”, and subtly streamlining the cross-section, Fire Axe. Inc was able to equalize the balance of the head, with its weight precisely centered over the axis of the handle, balanced front-to-back and side-to-side, the Firefighter Axe not only swings more easily, it flies straight, landing a more solid blow without tending to tip. An integral guard extends down the blade side of the head to enhance rigidity and protect the handle against impact on full penetration or over strikes. And because the mirror polished surface creates far less friction, you’ll find the Firefighter Axe cuts deeper, cuts cleaner, cuts faster…and stays sharp for the next time. 

Virtually hand made in the USA, with the finest American raw materials.
Each high grade tool steel head is painstakingly hand-cast with the same lost-wax investment casting method used to reproduce fine sculpture…and precisely ground to the ideal blade angle for the optimum balance of sharpness and durability. Then the heads are heat treated to make them twice as hard as a regular fire axe, and hand polished to a mirror finish. These axes are all steel—not chrome plated. They’ll cut through 16-penny nails and remain razor sharp. And cleaning is quick and easy. With a little care, your Firefighter Axe will keep its good looks, and fine edge, for at least as long you own it. 

Securely mounted to a stronger handle. Choose Fiberglass or Wood.

The Firefighter Axe’s superior performance doesn’t stop at the head. Whether you choose a wood or fiberglass handle, these are probably the best axe handles you’ll find anywhere. Available in 28" length. 

Traditional Tennessee hickory
The wooden handle is made by American craftsmen of the finest 2nd growth Tennessee Hickory. And it’s attached to the head not with a single wedge, like most axes, but four! One lateral wood wedge and three additional metal wedges work together to brace the head in all dimensions. Frankly, if you ever want to replace the handle, you’ll have to drill out the old one. 

High-performance fiberglass.
A handle made exclusively for the Firefighter Axe by NUPLA Corp., one of America’s top manufacturers of tool handles. The medium brown fiberglass haft was designed to look as much like a traditional wooden handle as possible. But it’s rated at 1200 lbs. And it’s so firmly epoxied to the head that it simply won’t come off. Plus its textured grip, short throat, and “fawn’s foot” knob provides a firm, non-slip grip, even with wet gloves. No matter which handle you choose, this is an axe you’re going to hold onto…no matter what. 

  • Redesigned to cut faster, penetrate more deeply 
  • Cut through 16-penny nails and remain razor sharp 
  • Securely mounted to a stronger handle. Choose Fiberglass or Wood. 
  • Weight 4 lbs. 28" total length 
  • Pick: 3-5/8", patented design

Ratings & Reviews

No reviews available

Be the first to Write a Review