Tohatsu 200HP V6 High Power Motor
Details
Tohatsu 200HP V6 High Power Motor
The 200 hp powerful four stroke, the BFT200D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
The new BFT200D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT200D the right choice.
Features:
- High output 90A alternator that produces 60A charging amps
- Large Displacement 3.6 Litre V6
- Available in 20" & 25" shaft lengths, standard or counter rotation
- Double sealed multi-layered paint process to help protect against corrosion
- Painted interior cooling passages for extra protection against corrosion
- Semi direct air intake system
- Enhanced sealing system by adopting three new large locks
- Ultra-low 3 star CARB emission approved
- 5 Year limited warranty
- Lean burn control for better fuel economy at cruising speeds
- Maximum Acceleration System helps to deliver an exceptional hole shot
- 3-way cooling system to help protect against overheating
- Heavy-duty 5" diameter gear case built to withstand extreme conditions
- Non-linear rubber mounts provide smoother operation at all engine speeds
- A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
- Optimized fuel injection delivers the precise amount of fuel/air to each cylinder
- Through the prop exhaust for a quieter ride
- Built-in freshwater flushing system for easy routine flushing
- Separate dual air intake cowling design to help keep your engine's critical components cool
- Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
- Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS
- Low oil pressure warning
- Overheat warning
- Water in fuel warning
- Start-in-gear protection
- Over-rev. limiter
Specifications
- Engine (No. of Cylinder) 6 Cylinder SOHC, 60° V6, 24 Valve
- Output 200 hp (149.1 kw)
- Displacement 3,583 cc (218.6 cu.in.)
- Bore x Stroke 89 x 96 mm (3.5 x 3.78 in)
- Starting Electric
- Control Type Remote Control
- Gear Shift Forward - Neutral - Reverse
- Gear Ratio 2.0:1
- Ignition System MicroComputer Programmed
- Transom Height 20", 25"
- Fuel Unleaded Gasoline (87 Octane) or higher
- Oil Type NMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
- Oil Capacity 2.1 gal. (7.8 L) with filter
- Weight* 615 lbs. (279 kg)
- Alternator Output 12V, 720W, 90A
- Max. RPM Range 5,000 - 6,000
- Programmed Fuel Injection Standard
- Start In Gear Protection Standard
- Thermostat Controlled Cooling System Standard
- Through-The-Prop Exhaust Standard
- Overheat Buzzer Standard
- Power Trim and Tilt Standard
- Oil Pressure Warning Standard
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Ratings & Reviews
No reviews available
Be the first to Write a Review