Solberg RE-HEALING RF3 3% Fluorine Free Class B Foam Concentrate

Solberg RE-HEALING RF3 3% Fluorine Free Class B Foam Concentrate

SOLBERG® RE‑HEALING™ RF3 foam concentrate is an innovative environmentally sustainable fluorosurfactant and fluoropolymer-free foam concentrate used to effectively extinguish Class B hydrocarbon fuel fires. Proportioned at 3% solution, SOLBERG RE‑HEALING RF3 foam concentrate can be used in fresh, salt or brackish water. SOLBERG RE‑HEALING RF3 foam possesses excellent burn back resistance due to its remarkable flow and rapid resealing characteristics. SOLBERG RE‑HEALING foam concentrates are formulated using a new high performance synthetic foam technology to replace traditional AFFF, FFFP foam concentrates and older protein and fluoroprotein foams. SOLBERG RE-HEALING RF3 foam concentrate contains no sediments. SOLBERG RE‑HEALING RF3 foam concentrate is intended for use on Class B hydrocarbon fuel fires. It is not intended for use on Class B polar solvent fuels. The foam can be used to prevent re-ignition of a liquid spill and control hazardous vapors. On Class A fuels, SOLBERG RE‑HEALING RF3 foam will improve extinguishment in deep-seated fires. Foam discharge devices such as air aspirating, as well as, non-air aspirating equipment, including standard fire sprinkler heads, can be used to obtain maximum results. The product is mixed 3 part foam concentrate to 97 parts water. It may also be used as a 3% pre-mix solution. SOLBERG RE‑HEALING RF3 foam is compatible with most dry powder (chemical) agents.

Application
SOLBERG RE‑HEALING RF3 foam concentrate is intended for use on Class B hydrocarbon fuel fires. It is not intended for use on Class B polar solvent fuels. The foam can be used to prevent re-ignition of a liquid spill and control hazardous vapors. On Class A fuels, SOLBERG RE‑HEALING RF3 foam will improve extinguishment in deep-seated fires. Foam discharge devices such as air aspirating, as well as, non-air aspirating equipment, including standard fire sprinkler heads, can be used to obtain maximum results. The product is mixed 3 part foam concentrate to 97 parts water. It may also be used as a 3% pre-mix solution. SOLBERG RE‑HEALING RF3 foam is compatible with most dry powder (chemical) agents.

Fire Performance
SOLBERG RE‑HEALING RF3 foam concentrate has been tested to and meets the fire performance test criteria of Underwriters Laboratories, Inc. (UL) Standard 162, Underwriters’ Laboratories of Canada (ULC) Standard S564, FM Approval Standard 5130, European Standard EN 1568 Part 3 and International Civil Aviation Organization (ICAO) Levels B and C.

Foam Proportioning
SOLBERG RE‑HEALING RF3 foam concentrate can be proportioned at the proper foam solution percentage down to product temperatures of 35°F (1.7°C) using common foam proportioning devices such as:

• Eductors
• Inline balanced pressure proportioners
• Radio controllers
• Self-educting nozzles

Foam Discharge Outlets
Multiple foam generating equipment is approved or listed for a wide variety of system applications. Equipment including various foam makers and chambers; portable and fixed foam discharge nozzles; foam water sprinklers; and standard sprinklers.

Storage
The storage temperature range for SOLBERG RE‑HEALING RF3 foam concentrate is 35°F to 120°F (1.7°C to 49°C).

When stored in original containers or in manufacturer recommended equipment and within the specified temperature range, the shelf life is 20 years.

Compatibility
SOLBERG RE‑HEALING RF3 foam concentrate should not be mixed with other foam concentrates. For questions about compatibility or mixing, consult Perimeter Solutions Technical Services.

SOLBERG RE‑HEALING RF3 foam concentrate is compatible with multiple materials of construction such as carbon steel, stainless steel, brass, polyethylene and PVC. Galvanized steel should not be used in direct contact with the foam concentrate. For questions about materials of construction compatibility, consult Perimeter Solutions Technical Services.

Inspection
SOLBERG RE‑HEALING RF3 foam concentrate or pre-mix solution should be inspected annually per National Fire Protection Association (NFPA) Standards 11 and 25. A sample of the foam concentrate should be sent to the manufacturer for quality conditioning testing in accordance to NFPA 11.

Environment Information
SOLBERG RE-HEALING foam concentrates do not contain intentionally added PFAS chemicals including PFOA and PFOS. In making this statement, SOLBERG relies on information provided by its raw material suppliers and certain independent laboratory analysis conducted on the product.